Fargo DTC550 - Changing the Encoder Settings

FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
11-22
Changing the Encoder Settings
Use this option to choose the settings that coincide with the Printer's current encoding
configuration. Use the scroll buttons to select the option (you want to change).
Step Procedure
1 Select MENU, Setup Printer and Encoder Settings.
2 Change the desired option as needed.
• Mag: Press the CHANGE button to select None or Yes according to
whether or not a Magnetic Stripe Encoder is installed.
• Contact: Press the CHANGE button to select None or Yes according
to whether or not a Smart Card Encoder is installed.
• Prox: Press the CHANGE button to select None or Yes according to
whether or not a Prox Card Encoder is installed.
3 Press EXIT to save the value.