FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
7-1
Section 7: Ethernet Option Section
Introduction
The Ethernet option includes the Ethernet port and the internal Printer Server. See the
DTC550 Direct to Card Printer/Encoder Ethernet Upgrade Kit (D855177) Installation
Guide (Rev. 1.0).
• Printer Management: The Printer Driver provides bi-directional status information
so you can monitor and manage the Printer just as you would any other networked
Printer.
• Compatibility: The Fargo Ethernet option provides compatibility with TCP/IP and
802.3 Ethernet protocols with an IEEE 802.3 10/100Base-T Ethernet female RJ45
connector.
• Application: The Ethernet Option applies to the Fargo DTC550 Direct-to-Card
Printer Encoder. With the Ethernet Option properly installed and configured, these
printers are able to print in the same manner as a printer directly connected to the
PC via a USB interface.
To Next Page
Loading...
