FOR RESTRICTED USE only Fargo Electronics, Inc.
DTC550 Direct to Card Printer/Encoder User Guide (Rev. 2.8)
4-1
Section 4: General Troubleshooting
IMPORTANT! Fargo Card Printers require highly specialized Print Ribbons to function
properly. To maximize Printer life, reliability, printed card quality and durability, you must
use only Fargo Certified Supplies. For this reason, your Fargo warranty is void, where
not prohibited by law, if you use non-Fargo Certified Supplies. To order additional
materials, please contact your authorized reseller.
Reviewing the LCD display and LED light
The LCD display provides the current status of the Printer. Refer to the following tables
for a complete list and cause of all possible LCD messages. The tables (in this section)
display the LCD messages. If the LCD message is communicating an error or requires
an action, these tables will also offer a solution to what should be done.
The purpose of this section is to provide the User with specific procedures relating to the
LCD/SmartGuard Messages, Communication Errors, Card Feeding Errors, Encoding
Errors, Printing Process Errors and Diagnosing the Image Problems for the DTC550
series Card Printer.
To Next Page
Loading...
