Fujitsu PRIMERGY RX1330 M1

RX1330 M1 Upgrade and Maintenance Manual 211
Main memory
10.3.2 Removing a memory module
Figure 141: Removing the memory module
Ê Press the securing clips on both sides of the memory slot concerned
outward (1).
Ê Pull the memory module out of the slot (2).
10.3.3 Concluding steps
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 55
Ê "Switching on the server" on page 57
Ê "Resuming BitLocker functionality" on page 84
10.4 Replacing a memory module
10.4.1 Preliminary steps
Ê "Locating the defective server" on page 43
Ê "Disabling SVOM boot watchdog functionality" on page 64
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less