Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

270 Upgrade and Maintenance Manual RX1330 M1
System board and components
14.4.3.2 Removing the defective TPM
Ê Remove the TPM as described in section "Removing the TPM" on page 265.
Ê Leave the TPM spacer on the system board when removing the defective
TPM.
14.4.3.3 Installing the new TPM
I The TPM spacer is already present on the system board.
Ê Install the TPM as described in section "Installing the TPM" on page 262.
14.4.3.4 Concluding steps
Ê Reinstall the system board as described in section "Installing the new
system board" on page 280
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 55
Ê "Switching on the server" on page 57
Ê "Resuming BitLocker functionality" on page 84
I You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.

Fujitsu PRIMERGY RX1330 M1 Specifications

General

Number of Processors	1
Memory Slots	4
Maximum Memory	32 GB
Form Factor	1U Rack
Processor	Intel Core i3 product family Intel Pentium product family
CPU Family	Intel Xeon
Memory Type	DDR3 UDIMM
Storage	Up to 4 x 3.5" or 2.5" drives
Drive Bays	4
RAID	0, 1, 5, 10
RAID Controller	Optional
Network	2 x Gigabit Ethernet
Operating System Support	Windows Server, Red Hat Linux, SUSE Linux