2.4 Documents you need at hand
Maintenance procedures may include references to additional documentation.
When preparing the maintenance task, ensure that all required manuals are
available according to the overview below.
I – Ensure to store all printed manuals enclosed with your server in a
save place for future reference.
– Unless stated otherwise, all manuals are available online at
http://manuals.ts.fujitsu.com under x86 Servers.
For the Japanese market please use the following address:
http://jp.fujitsu.com/platform/server/primergy/manual/
Phillips
PH1 / (+) No. 1
UFM nylon
screw
M3 x 4.5 mm
(white)
C26192-Y10-C151
Phillips
PH1 / (+) No. 1
TFM module
M2.5 x 4 mm
(silver)
C26192-Y10-C103
Document Description
"Quick Start Hardware -
FUJITSU Server PRIMERGY
RX1330 M1" leaflet
Quick installation poster for initial operation,
available online
"ServerView Quick Start Guide"
" ServerView クイックスタート
ガイド " for the Japanese
market
Information on initial server setup and
software configuration, available online
Table 3: Documentation you need at hand
Screw driver/
bit insert
Screw Usage Type
Table 2: List of used screws (not applicable for the Japanese market)
To Next Page
Loading...
Need help?
General
