Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

RX1330 M1 Upgrade and Maintenance Manual 233
Optical disk drive
12.4 Replacing the ODD
12.4.1 Preliminary steps
Ê "Locating the defective server" on page 43
Ê "Removing backup and optical disk media" on page 66
Ê "Suspending BitLocker functionality" on page 63
Ê "Shutting down the server" on page 45
Ê "Disconnecting the server from the mains" on page 46
Ê "Getting access to the component" on page 47
12.4.2 Removing the defective ODD
Ê Remove the ODD as described in section "Removing the ODD" on
page 230.
12.4.3 Installing the new ODD
Ê Install the ODD as described in section "Installing the ODD" on page 228.
12.4.4 Concluding steps
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 55
Ê "Switching on the server" on page 57
Ê "Resuming BitLocker functionality" on page 84
Field Replaceable Unit
(FRU)
Hardware: 5 minutes
Tools: Torx Plus 6 screw driver

Fujitsu PRIMERGY RX1330 M1 Specifications

General

Number of Processors	1
Memory Slots	4
Maximum Memory	32 GB
Form Factor	1U Rack
Processor	Intel Core i3 product family Intel Pentium product family
CPU Family	Intel Xeon
Memory Type	DDR3 UDIMM
Storage	Up to 4 x 3.5" or 2.5" drives
Drive Bays	4
RAID	0, 1, 5, 10
RAID Controller	Optional
Network	2 x Gigabit Ethernet
Operating System Support	Windows Server, Red Hat Linux, SUSE Linux