Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

RX1330 M1 Upgrade and Maintenance Manual 91
6 Power supply
Safety notes
V CAUTION!
● Do not disassemble the power supply unit. Doing so may cause
electric shock.
● Areas around the power supply unit may remain extremely hot after
shutdown. After shutting down the server, wait for hot components to
cool down before removing the power supply unit.
● When installing the power supply unit, be sure to confirm that the
connector of the power supply unit is not damaged or bent.
● Do not insert your hands in the power supply unit slot when removing
the power supply unit. Doing so may cause electric shock.
● If the power supply unit is hard to remove, do not pull out it by force.
● The power supply unit is heavy, so handle it carefully. If you drop it by
mistake, injuries may result.
● For further safety information, please refer to chapter "Important
information" on page 31.

Fujitsu PRIMERGY RX1330 M1 Specifications

General

Number of Processors	1
Memory Slots	4
Maximum Memory	32 GB
Form Factor	1U Rack
Processor	Intel Core i3 product family Intel Pentium product family
CPU Family	Intel Xeon
Memory Type	DDR3 UDIMM
Storage	Up to 4 x 3.5" or 2.5" drives
Drive Bays	4
RAID	0, 1, 5, 10
RAID Controller	Optional
Network	2 x Gigabit Ethernet
Operating System Support	Windows Server, Red Hat Linux, SUSE Linux