12. ROUTES
12-8
Context sensitive menus
A context-sensitive menu for setting the draught is available on the [Alert Parameters]
page. Right-click [Draught/m] to show the menu. [Set "ALL" setting to all legs] applies
the draught value of [Check type: All Legs] to all legs. [Clear setting] restores previous
settings for each leg.
Item Description Item Description
Check type Check how to apply the alerts,
to every leg or individual leg.
(Only [Draught] can be applied
to every leg.)
Offshore
Production Area
Offshore production area
Safety
Contour
Set the safety contour (in me-
ters).
Military Practice
Area
Military practice area
UKC Limit Under keel clearance limit. Seaplane
Landing Area
Seaplane landing area
Date (UTC) A chart may have date-depen-
dent features. Enter the actual
data of embarkation to know
date-dependent features.
Submarine
Transit Lane
Submarine transit lane
Leg Leg number Anchorage Area Anchorage area
Draught/m Ship’s draught MarineFarm
Aquaculture
Marine farm aquaculture
Safety Con-
tour
Safety contour PSSA Area Particularly Sensitive Sea Area
Navigation-
al Hazard
Navigational hazards No Vector Chart No vector chart for area.
Areas to be
Avoided
Areas to be avoided Too Many Dan-
gers
Too many dangerous areas/ob-
jects.
User Chart
Danger
User chart danger area UKC Limit
Traffic
Separation
Zone
Traffic separation zone Sounding UKC
Limit
Particularly Sensitive Sea Area
Inshore
Traffic Zone
Inshore traffic zone Non-official ENC No official ENC data
Restricted
Area
Restricted area Not Up-to-date Chart not up to date.
Caution
Area
Caution area Permit Expired Permit for chart has expired.
Check a box to highlight the
appropriate chart alert area.
Check a box to highlight the
appropriate chart alert area.
Set “ALL” setting to all legs
Clear setting
To Next Page
Loading...
