9. Raster Chart Material
9-43
General page
Ship Outlines
True outline shown if "Beam width>6 mm / Length>6 mm". You can set
whether width or length is used to set limit for displaying true symbol.
Ship outlines: Choose OFF or ON to show ship symbol minimized or scaled
symbol, respectively.
AIS outlines: Choose OFF or ON to show AIS target symbol in same size or
scaled symbol, respectively.
Velocity Vectors
Style: Select style for velocity vectors.
• Conventional: (simplified symbol)
• Std ECDIS (minimized symbol)
Time increments: This controls both own ship and targets ticks. If ticks will
be too tightly spaced, they will be automatically removed from display, until
the spacing between ticks is enough to distinguish them separately. This
depends on display scale and speed of vessel/target.
Radar Antenna
Check to show position of radar antenna with the symbol "x".
To Next Page
Loading...
