30. Alerts
30-13
Alert number 706: GYRO ERROR /5/12
------------------------------------
GYRO1 DATA IS NOT RECEIVED CORRECTLY
USE 'INITIAL SETTINGS' MENU TO SET
GYRO AGAIN. IF FAILURE STILL
EXISTS, USE 'SENSORS' SPEED/POSITION
PAGE TO SELECT VALID SENSORS.
Alert number 707: GYRO ERROR /5/12
------------------------------------
GYRO2 DATA IS NOT RECEIVED CORRECTLY
USE 'SENSORS' SPEED/POSITION PAGE TO
SELECT VALID SENSORS.
Alert number 708: LOG ERROR /5/12
-----------------------------------
LOG DATA IS NOT RECEIVED CORRECTLY.
USE 'SENSORS' SPEED/COURSE
TO SELECT VALID SENSORS
Alert number 708: DUAL AXIS LOG (WT) ERROR /5/12
------------------------------------
DUAL AXIS LOG DATA IS NOT RECEIVED
CORRECTLY. USE SPEED/COURSE PAGE
TO SELECT VALID SPEED SENSORS.
Alert number 709: DUAL AXIS LOG (BT) ERROR /5/12
------------------------------------
DUAL AXIS LOG DATA IS NOT RECEIVED
CORRECTLY. USE SPEED/COURSE PAGE
TO SELECT VALID SPEED SENSORS.
Alert number 710: ECHO SOUNDER ERROR /6/13
------------------------------------
ECHO SOUNDER DATA IS NOT RECEIVED
CORRECTLY.
VERIFY ECHO SOUNDER OPERATION.
Alert number 711: WIND SENSOR ERROR /6/13
------------------------------------
WIND SENSOR DATA IS NOT RE CEIVED
CORRECTLY.
VERIFY WIND SENSOR OPERATION.
Alert number 712: POSITION EQUIPMENT ERROR /5/12
------------------------------------
POSITION EQUIPMENT 1 DATA IS NOT
RECEIVED CORRECTLY. USE 'SENSORS'
POSITION TO SELECT VALID POS SENSOR.
Alert number 713: POSITION EQUIPMENT ERROR /5/12
------------------------------------
POSITION EQUIPMENT 2 DATA IS NOT
RECEIVED CORRECTLY. USE 'SENSORS'
POSITION TO SELECT VALID POS SENSOR.
To Next Page
