30. Alerts
30-12
Alert number 636: AIS DISPLAY 95% FULL /6/13
------------------------------------
WHEN 95% OF DISPLAY CAPACITY FOR AIS
TARGETS ARE IN USE.
Alert number 637: AIS DISPLAY 100% FULL /5/12
------------------------------------
WHEN 100% OF DISPLAY CAPACITY FOR AIS
TARGETS ARE IN USE.
Alert number 638: AIS STORAGE 95% FULL /6/13
------------------------------------
WHEN 95% OF STORAGE CAPACITY FOR AIS
TARGETS ARE IN USE.
Alert number 639: AIS STORAGE 100% FULL /2/9
------------------------------------
WHEN 100% OF STORAGE CAPACITY FOR AIS
TARGETS ARE IN USE.
Alert number 640: TT DANGEROUS /2/9
------------------------------------
TT HAS MET DANGEROUS TARGET
LIMIT SET BY CPA AND TCA
Alert number 641: TT LOST /6/13
------------------------------------
TT HAS REPORTED TT LOST.
Alert number 642: TT STORAGE 95% FULL /6/13
------------------------------------
WHEN 95% OF STORAGE CAPACITY FOR TRACKED
TARGETS ARE IN USE.
Alert number 637: TT STORAGE 100% FULL /5/12
------------------------------------
WHEN 100% OF DISPLAY CAPACITY FOR TRACKED
TARGETS ARE IN USE.
Alert number 700: NO SENSOR PARAMETERS /5
------------------------------------
SENSOR PARAMETER FILES ARE MISSING.
LOAD INSTALLATION PARAMETERS OF
ECDIS. IF REQUIRED USE BACKUP COPY
OF PARAMETERS.
Alert number 701: B-ADAPTER ERROR /6/13
------------------------------------
B-ADAPTER DOES NOT OPERATE DUE TO A
SYSTEM FAULT. SWITCH OFF MAIN
CIRCUIT BREAKER THEN ON AGAIN.
CALL SERVICE IF FAILURE STILL EXISTS
Alert number 702: ENGINE CONTROL COMM ERROR /6/13
------------------------------------
CONNECTION TO ENGINE CONTROL HAS
BEEN LOST. CHECK THAT CONNECTION IS
OK.
To Next Page
