8. Vector Chart Material
8-8
4. In the Load or Update Charts from loaded CD-ROM window (see page 8-10), select the charts to load into the
ECDIS. BE SURE TO CHECK "Permit".
IMPORTANT!
Check "Permit"
5. Click the Load button to load charts into the ECDIS. See also "Interpretation of Load or Update Charts from
loaded CD-ROM dialog box" on page 8-10.
6. Before ECDIS starts loading charts (then automatically converts them into SENC format) you are asked to
confirm this operation. Click the OK button.
Charts are loaded into ECDIS then automatically converted to SENC format. The SENC Convert window appears.
Note, that chart and/or its update(s) in the conversion list are ready for use after conversion of all charts/updates are
completed.
7. If an error is detected during conversion from ENC to SENC, the following window appears. To find the reason
click the Details button.
To Next Page
