(WT)
1. The source and edition date of the CD is displayed here.
2. A list of charts stored in the CD-ROM, edition number of the chart and the number of updates included in the
chart.
3. In the Load Selectors field, you can select how to pick desired charts from the list:
• Name: ECDIS will display chart names on graphical presentation if selected.
• Permit: ECDIS will highlight the charts that are available in the CD-ROM and for which you have permits.
• RENC Canceled Charts: ECDIS will show the charts on the display that are canceled on RENC and
normally on CD-ROM.
• Group: If you have predefined a group of charts, ECDIS will highlight those charts in the group that are
available in the CD-ROM.
• Manual Selection: You can highlight desired charts from the list.
• Missing only: Loads and displays on the graphical presentation only charts and their updates that are not
already loaded into the ECDIS.
4. The View CD-ROM Publisher Notes button is used to view important notices published by the chart producer.
The View CD-ROM content Summary button is used to list charts available on CD-ROM. The Load and
Conv. History button checks what is loaded and converted from the CD-ROM. The Remove button is used to
remove the CD-ROM catalogue permanently from the ECDIS.
5. The Edit Group button is used to create and modify a group. See section 8.5.5 "How to group S57 chart cells".
6. The Load button is used to start loading charts.
Note: The system can make conversion into the SENC and set the "Display Until" date automatically. This is the
recommended way. See section 8.4.2 "How to get automatic SENC conversion and display until date" for the
procedure.
To Next Page
Loading...
