8. Vector Chart Material
8-13
How to remove an unnecessary CD-ROM catalogue
1.
2.
NM
(WT)
If you have unnecessary CD-ROM catalogues on your CD-ROM list, you can remove them as follows:
1. Show the Load or Update Charts from loaded CD-ROM dialog box. (See page 8-10.)
2. Select desired CD-ROM.
3. Use the Remove button to permanently remove selected CD-ROM catalogue from ECDIS.
Messages that control reload
If you try to load charts with the
same edition already loaded into
your hard disk or if you try to load
the same update already loaded into
your hard disk, you get the message
shown right, after clicking the Load
button.
If you want to avoid the very time consuming task of reloading charts that you already have, then you should select
the "No to all" option.
However if you want to reload charts, then select the "Yes to all" option.