8. Vector Chart Material
8-14
Messages that contain only notice
If you tried to load chart data that is older than you already have in your hard disk, you will get one of the following
messages:
This indicates that you are using a
newer edition of the chart mentioned
in the box.
This indicates that you are using a
newer reissue of the chart mentioned
in the box, which includes this
update.
This indicates that you are using a
newer reissue of the chart mentioned
in the box.
.
This indicates that you are using the
updates mentioned in the box.
.
Note: You cannot replace chart data that is already in use unless you only replace the latest Base cell or update. If
you want to reload older data again, you must first remove the chart from your hard disk. See section 8.5.4 "How to
remove S57 chart cells from the system".
To Next Page
Loading...
