GE Vivid S60

Prepare the System for Use
3-36 Vivid S70 / S60 – User Manual
BC092760-1EN
01
Key illumination
The keys on the control panel are illuminated according to their
availability:
• Illumination in green: The key function is currently active.
• Illumination in yellow: The key function is available (but
not active) in the current state of the system.
• No illumination: The key is not available in the current state
of the system.
Adjust the Control Panel
The system Control panel can be freely adjusted to swivel or
move up/down. There are two brake handles located under the
control panel.
To swivel the control panel left or right
1. Pull and hold the left brake handle, located under the control
panel.
The control panel can now be freely rotated left or right.
2. When reaching the desired swivel angle, release the
swivel-brake handle.
The control panel will remain at the set angle.
NOTE: The main display will swivel together with the control-panel. In
addition the main display may be swiveled independently of the
control-panel.
To move the control panel up or down
1. Pull and hold the right-hand handle, located under the
control panel.
The control panel can now be freely adjusted up or down.
2. When reaching the desired height, release the height-adjust
handle.
The control panel will remain at the set height.
NOTE: When the control panel is lowered it moves towards the
operator. When panel is raised it also moves away from the
operator.
NOTE: When preparing the system to be moved, pull the left handle and
bring the control panel to a center position. Swivel it slightly till a
locking click is heard.