Archiving
10-56 Vivid S70 / S60 – User Manual
BC092760-1EN
01
Data Backup and restore
The Backup/Restore function enables the user to:
• Copy/Restore the patient archive.
• Copy/Restore the system configuration. The Copy/Restore
system configuration feature enables the user to configure
several units with identical presets, providing that the units
have the same software version.
To minimize accidental loss of data, perform backup of the
patient archive stored on the local harddrive at least once a
week.
There is no backup function for the images or reports (no
creation of a safety copy). For long-term storage, images and
reports should be moved to a USB HD or to a network shared
folder using the Disk management procedure (see page 10-48).
Only users with administration rights have access to the backup/
Restore function.
GE Healthcare is not responsible for lost data if the suggested
backup procedures are not followed and will not aid in the
recovery of lost data.
DO NOT use the local harddrive for long-term image storage.
To Next Page
Loading...
