Storing images and cineloops
Vivid S70 / S60 – User Manual 10-9
BC092760-1EN 01
NOTE: Cineloop storage can be configured to store heart cycles
with additional time before and after the R-wave (see
‘Global imaging settings’ on page 12-17).
Storing cineloop with preview
The function Preview Loop before store is enabled (see
page 12-17).
1. Press Store mode rotary/push button on the Touch panel to
select between cycles and time storage and adjust Num
Cycles or Timespan to define the number of cycles or
seconds to store.
2. While scanning, press Store.
• If Retrospective storage is selected (see page 12-17),
the last elapsed defined number of cycles/seconds are
displayed on the screen (but not stored).
• If Prospective storage is selected (see page 12-17),
the forthcoming defined number of cycles/seconds are
displayed on the screen (but not stored).
3. If desired, select and adjust the cineloop to store using the
cineloop controls (see ‘Cineloop’ on page 4-6).
4. Press Store to save the cineloop.
A thumbnail is displayed on the clipboard and scanning
resumes immediately.
Saving images and cineloops to a standard format
Images and cineloops can be saved to a removable media or a
shared network folder in the following standard formats:
• Still images: JPEG, MPEG, DICOM and RawDICOM (Raw
data + DICOM), VolDicom and HDF
• Cineloops: AVI, MPEG, DICOM and RawDICOM (Raw data
+ DICOM), VolDicom and HDF
1. In live: press Freeze.
In replay: select an image thumbnail on the clipboard.
2. Press Update menu on the control panel.
The System menu is displayed.
To Next Page
Loading...
Need help?
General
