Customize Configuration
12-78 Vivid S70 / S60 – User Manual
BC092760-1EN
01
4. In the Destination field, select the media to store the files on.
5. In the Protocol Directory field, select an existing folder or
enter the name of a new folder. The Protocols will be stored
to that location.
6. Highlight the Protocol(s) to be exported. If a folder is
highlighted, all Protocols in the folder are selected.
Make sure that the option Export Scan Assist Pro Creator
Installation is checked.
The installation file for the Scan Assist Pro Creator will be
stored to a separate folder named
ScanAssistantCreatorSetup (Figure 12-61).
7. Select Export.
The Protocols and the Scan Assist Pro Creator installation
file are exported.
Figure 12-61. Export folder structure
Installation of the Scan Assist Pro Creator
1. Insert the USB media mentioned above into the computer.
2. Double-click on the Setup.exe file located in the
ScanAssistantCreatorSetup folder and follow the
instructions on screen to install the Scan Assist Pro Creator.
Starting Scan Assist Pro Creator
Off-system
1. Double-click on the Scan Assist Pro Creator icon on the
computer desktop to start the Protocol.
To Next Page
Loading...
