Software update
Vivid S70 / S60 – User Manual 15-13
BC092760-1EN 01
Save TCP/IP settings
The TCP/IP settings of the system need to be saved after a
software upgrade.
1. Press Utility/Config on the Control Panel.
2. Select the Connectivity category and TCP/IP subgroup.
The TCP/IP settings window is displayed (Figure 15-5).
Figure 15-5. TCP/IP settings
3. Press Save settings.
4. Reboot the system
.
5. The software upgrade is complete. If you have any
questions or concerns, please call your GE service
organization.
To Next Page
Loading...
