Moving and transporting the system
Vivid S70 / S60 – User Manual 3-51
BC092760-1EN 01
Using Transportation mode
With Transportation mode, the system power is maintained by
the battery. Transportation mode is either activated by the user,
or automatically activated if there is an AC power failure or the
power cable is unplugged in preparation for transportation.
Transportation mode can be used to reduce system startup time
for portable exams. While in Transportation mode, the system
maintains the current patient and scan settings. As a result,
when power is restored, the current patient's details, scan
settings and stored images are readily available.
To enter Transportation mode
1. When the Exit dialogue window is displayed, select
Transportation.
The main display turns off.
The Ready for Transportation screen appears on the
touch panel, indicating the system is ready for
transportation.
Figure 3-33. Ready for transportation
2. Disconnect the AC cable from the power socket and
transport the system to a different location.
NOTE: Check the Battery indicator. When the battery's charge is
less than 20% the system switches to Standby mode and
the touch screen turns off after the power cable is
disconnected from power.
Probe cables may get caught on external devices, such as
doors, medical devices in the transporting path, wheels, or feet.
Please ensure cords are wrapped properly, not extended
beyond sides of system and out of the way for portables.
To Next Page
Loading...
