GE Vivid S60

Measurements and Analysis
8-6 Vivid S70 / S60 – User Manual
BC092760-1EN
01
Assign and Measure modality
Figure 8-2. Example of a measurement study
1. Press Measure on the control panel.
The Measurement menu is displayed, showing the
measurement category for the current application
(Figure 8-2).
To change Measurement category:
1. Select the heading in the Measurement menu and choose
another category.
NOTE: This can also be done from the Touch panel.
To perform measurements from a study:
1. Select the study (folder) in the Measurement menu.
NOTE: This can also be done from the Touch panel.
1. Measurement category for the
current application
2. Study
3. Opened study
4. Performed measurement
5. Pre-selected measurement
6. Access to other studies for the current measurement category.
7. Controls for the current measurement
8. General controls for the measurement application