M-Mode
Vivid S70 / S60 – User Manual 5-9
BC092760-1EN 01
This system has three types of M-Mode:
• Conventional M-Mode (MM): displays a distance/time plot of
a cursor line in the axial plane of the 2D-image.
• Anatomical M-Mode (AMM): displays a distance/time plot
from a cursor line, which is independent from the axial
plane. AMM is available in grayscale, color, TVI, Tissue
Tracking, Strain rate and Strain modes.
• Curved Anatomical M-Mode (CAMM): displays a distance/
time plot from a free-drawn cursor line. CAMM is available in
grayscale, color, TVI, Tissue Tracking, Strain rate and Strain
modes.
Conventional M-Mode can be combined with Color Mode.
Using M-Mode
Conventional M-Mode
1. To access M-Mode from any other scan mode, press MM on
the control panel.
2. Use the trackball to position the cursor over the required
area of the image.
3. Press Freeze.
4. Use the trackball to scroll through the data acquired.
Anatomical M-Mode
1. In M-Mode or 2D-Mode Freeze, press AMM on the Touch
panel.
NOTE: Anatomical M-Mode can also be used with previously
acquired digitally stored 2D images. More than one heart
cycle should be stored if performing M-Mode in post
processing.
2. Use the trackball (assigned function: Pos) to position the
cursor over the required area of the image.
3. Press Trackball to allow free rotation of the solid full-length
cursor line throughout the 2D image (trackball assigned
function: Angle).
4. Rotate the solid cursor line to the desired direction.
To Next Page
Loading...
Need help?
General
