Image Optimization
5-10 Vivid S70 / S60 – User Manual
BC092760-1EN
01
Curved Anatomical M-Mode
1. In M-Mode, press Curved AMM.
2. Use the trackball (assigned function: Pos) to position the
starting point of the time motion curve.
3. Press Select to anchor the starting point of the time motion
curve.
4. Use the trackball to position the next point of the time motion
curve.
5. Press Select to anchor the point of the time motion curve.
6. Repeat step 4 and 5 up to draw a complete time motion
curve.
NOTE: The time motion curve can be edited by following the curve
back to the desired point and redraw.
7. On the last point, press Select twice to terminate the curve.
NOTE: To edit the time motion curve, select a point, move it to a
new position and press Select.
To Next Page
Loading...
