Customize Configuration
12-70 Vivid S70 / S60 – User Manual
BC092760-1EN
01
Default remote path setting
The user can define a default remote path for a network shared
folder (\\server-name\share-name). The default remote path can
then be selected as a destination archive for the following
operations:
• Export traces function in Q-Analysis
• Export of system error log file
• Export of report templates
• Save as function for images
• Save as function for reports
To define a default remote path:
1. Press Utility/Config on the Touch panel and log on as
administrator if required.
2. Select the Connectivity category and Remote subgroup.
The Remote sheet is displayed.
Figure 12-52. The Remote sheet
3. In the Remote Path section, enter a remote path of a shared
folder on the network.
To check the connection, press Check.
4. In the Configurable Remote path user section enter the user
name and password required to access the shared folder.
To Next Page
Loading...
