Selection of a stress test protocol template
Vivid S70 / S60 – User Manual 7-3
BC092760-1EN 01
Selection of a stress test protocol
template
1. Press Stress on the Touch panel.
The Protocol screen is displayed (see Figure 7-1) showing
the default stress protocol for the current probe and
application.
2. Turn freeze off to initiate scanning using the current
template.
To use another template, press Template and select the
desired template from the template list. Turn freeze off to
initiate scanning.
NOTE: To create or edit a template see page 7-26.
Figure 7-1. The Protocol screen
1. Level selection
2. Projection selection
3. Current acquisition
4. Group of views
To Next Page
Loading...
