Image acquisition
Vivid S70 / S60 – User Manual 7-9
BC092760-1EN 01
Continuous capture mode
Continuous capture mode enables the user to perform
acquisition continuously for several views at any level
depending on the selected template configuration. Continuous
capture consists of temporarily saving images acquired in a
storage buffer. To enable best possible use of the limited storage
buffer capacity, a Pause/Capture mode is provided, as opposed
to the normal Freeze/Scan mode. The Pause mode enables
scanning and live display on the screen, without any capture,
thereby leaving the buffer available.
To run Continuous capture, the user has to select a template
where this feature is activated (see page 7-26 about template
configuration).
The buffer bar
When entering a cell with Continuous capture enabled, a Buffer
bar is displayed in the Info window (Figure 7-4). The Buffer bar
displays the following information:
• The scanning state:
• PAUSE: live scanning without storing
• CAPTURE: live scanning with storing to buffer
• The percentage of the buffer that is filled
• The buffer filling progression showed by a filling gauge
To Next Page
Loading...
