Quantitative Analysis
9-12 Vivid S70 / S60 – User Manual
BC092760-1EN
01
Zooming in the Analysis window
1. In the Analysis window, press and hold down the Select key
while dragging the trackball cursor to define the zooming
area.
2. Release the Select key.
The selected area is displayed in the Analysis window.
To unzoom
1. In the Analysis window, press Update menu.
The System menu is displayed.
2. Select Unzoom.
Deletion of a trace
The user can delete all traces at once or one at a time.
To delete all traces
1. If necessary, press Trackball until the QA trackball
assignment is selected.
2. With the cursor in one of the Cineloop windows, press
Update menu.
The System menu is displayed.
3. Select Delete all sample areas.
To delete one specific trace
1. If necessary, press Trackball until the QA trackball
assignment is selected.
2. Place the cursor on the sample area to delete.
3. Press Update menu.
The System menu is displayed.
4. Select Delete sample area.
To Next Page
Loading...
