4.4.2.2 Load "Complete Backup"
Note
The "Complete Backup" contains factory default settings that are adapted for the installed Application
Software version.
1. Perform
"Preparations" on page 4-12
.
2. Select the "Complete Backup" (1) (see figure below) and click the
[>>]
button (2) to copy it into the
Load Data field.
Figure 4-12 Load Backup Data
3. Click the
Load
button (3) to start the loading procedure of the complete backup into the system.
The US Application Software restarts.
Functional Checks
Voluson E-Series Service Manual
5539550APB Revision 6
4-13
To Next Page
Loading...
