15. Booting auto ....
Figure 8-8 Boot screen - auto
16. Updating will take some time ....
Figure 8-9 Please wait ...
17. Please wait until all processes are finished (100 percent completed).
18.
The system is rebooting into windows (Boot screen - Voluson).
Note
An automated process was developed to install the required software parts, perform check disk, remap drive
letters and match settings. During this process the system might reboot several times!
Figure 8-10 automatic processes are running
19. Please wait until all processes are finished. Finally the 2D screen is displayed on the monitor.
20.
Remove the System DVD from the DVD/CD+R/RW Drive drive.
Replacement Procedures
8-8
Voluson E-Series Service Manual
5539550APB Revision 6
To Next Page
Loading...
