Content in this section
3.7.1.1 How to invoke Setup Procedure - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-43
3.7.1.2 How to display System Manuals (eDOC) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-43
3.7.1.3 How to enter Date and Time - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-44
3.7.1.4 How to enter Clinic Name - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-44
3.7.1.5 How to change Language and/or EUM Language - - - - - - - - - - - - - - - - - - - - - - 3-44
3.7.1.6 How to change Video Norm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-45
3.7.1.7 How to change Ext. Monitor Output Settings - - - - - - - - - - - - - - - - - - - - - - - - - - 3-45
3.7.1.8 How to adjust function of the Footswitch - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-45
3.7.1.9 How to change the Keyboard Layout - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-45
3.7.1.10 How to configure InSite - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-45
3.7.1.11 How to execute Additional Software Installation (ASI) - - - - - - - - - - - - - - - - - - - 3-45
3.7.1.12 How to activate User Login Authentication - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-46
3.7.1.13 How to perform Full Disk Encryption - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-46
3.7.1.14 How to protect the system by Whitelisting - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-48
3.7.1.1 How to invoke Setup Procedure
1. Press the Utilities key on the control console.
2.
In the “Utilities” menu touch the
Setup
button to invoke the setup desktop on the screen.
3. Select the corresponding major group from the rightside of the screen and then click the desired tab.
Note
In general operations are done with the trackball and the trackball keys (mouse emulation).
Trackball
(mouse position):
positions the pointing device (arrow) on the desktop
left / right trackball key (left mouse button):
sets, fixates markers and activates pages/buttons etc. marked by the pointing device
upper / lower trackball key (upper trackball key = right mouse button):
no function in system desktop
3.7.1.2 How to display System Manuals (eDOC)
1. Insert the eDOC DVD into the drive.
2.
Press the Utilities key on the control console.
3. In the "Utilities" menu touch the
eDOC
button to open the index file from the DVD.
Note
If the eDOC DVD is not inserted, a message to insert the DVD appears.
Setup Instructions
Voluson E-Series Service Manual
5539550APB Revision 6
3-43