Operation – Monitoring and Diagnosis
User Manual corpuls
3
114 ENG - Version 2.1 – P/N 04130.2
6.4.2 Preparing Longterm ECG
Prerequisite for the longterm ECG is a 4-pole ECG monitoring cable connected
to the patient (see chapter 6.2.4 Performing ECG Monitoring, p. 98). If no 4-pole
ECG monitoring cable is present, the DE-lead (if connected) will be recorded. If
both lead II and lead DE are present, only lead DE is recorded.
6.4.3 Performing Longterm ECG
1. Press the Monitor key.
2. Press the softkey [LT-ECG]. The longterm ECG with monitoring function is
displayed.
Fig. 6-16 Longterm ECG with monitoring function
3. Softkey [LT-ECG] is aktive (highlighted).
4. Select the required point in time on the timeline with the jog dial.
5. Select the required resolution of the longterm ECG with the softkeys
[Zoom +] or [Zoom -].
6. Press the softkey [Print] to print out the longterm ECG displayed.
7. Pressing the softkey [LT-ECG] again deactivates the softkey and the
parameter fields or the curve field can be selected with the jog dial and
configured with the context menus.
8. Press the softkey [Close] to leave the view of the longterm ECG.
On the printout of the longterm ECG, the individual designations of the IBP
curves are not printed.
To Next Page
Loading...
