Data Management
User Manual corpuls
3
188 ENG - Version 2.1 – P/N 04130.2
8.4 Master Data
Persons responsible for the device can configure and save master data (see
chapter 7.4.7 Configuration of Master Data (Persons Responsible for the
Device), p. 169.
These master data are partly contained in the D-ECG printout. If a D-ECG is
transmitted to the hospital by fax (optional), this D-ECG can be identified
unambiguously by means of these master data.
Some of these master data can be modified by the standard user:
Information Explanation
Transport type Type of transport, e.g. “emergency vehicle)”
Radio ID Identification of a radio subscriber in a
radiocommunication area, e.g. “FD x-city 1-83-2“
Location Location of the rescue vehicle
Callback phone Mobile phone number, e.g. for enquiries to the team
Medical team Names of the medical team
8-1 Master data
These modifications are not saved and only apply to the current mission. After
the corpuls
3
has been switched off, the master data, originally configured by
the person responsible for the device, apply once again.
The following stages are required to modify the master data:
1. Select in the main menu "System" ► "Settings".
2. Press softkey [Master]
3. Select the required master data information with the jog dial.
4. Enter the required information and confirm by pressing the softkey
[Enter].
5. Confirm by pressing the softkey [OK].
To Next Page
Loading...
