GS corpuls3 - B Function Checklist

User Manual corpuls
3
Appendix
ENG - Version 2.1 – P/N 04130.2 277
B Function Checklist
A function check of the corpuls
3
must be performed each time you start duty. The function check
guarantees unrestricted function and readiness for use of the corpuls
3
and is an important addition
to the automatic self tests performed internally in the corpuls
3
. The following checklist serves as a
suggestion for complementation of local documents.
1. Perform the function check as described in chapter 9 Maintenance and Tests, S. 206.
2. Tick completed checks on the checklist.
corpuls
3
function checklist
Date: Operator:
Shift: Device name or serial number:
Site or department:
Rescue equipment:
Function check of the device
Automatic self test OK
Function check
Visual inspection performed Oximetry
Function check of defi./pacer CO
2
Function check of ECG monitoring, if
necessary with the optional ECG cable
tester
NIBP
Memory card present and inserted IBP
Memory capacity sufficient Temp
Check network connections of the
modules
CPR feedback
Function check of the power supply
Battery for individual modules present
State of charge and remaining running time
Monitor module
Patient module
Defibrillator/Pacer module
Checking accessories
corPatch electrodes and
replacement present
Oximetry sensor present
ECG electrodes present CO
2
adapter (2 items) present
Sensor cable/intermediate cable present Printer paper present in printer compartment
Shock paddles present Spare roll of printer paper present
Baby shock electrodes present Disposable razor present
Electrode gel present
Space for comments
Table A
-1 Function checklist (sample)