GS corpuls3 - CPR Feedback

Configuration User Manual corpuls
3
154 ENG - Version 2.1 – P/N 04130.2
7.2.5 CPR Feedback
1. In the main menu, select "Defib" ► "CPR".
The configuration dialogue opens.
Fig. 7-13 Settings for CPR feedback
2. Select required settings.
Table 7-9 shows the possible values.
Field Setting Values
CPR depth Unit cm; in
Audio AAM
AED Enabled, disabled
Man. Defib. Enabled, disabled
Monitor Enabled, disabled
Volume 3 – 10
Audio metronome
Compress. tone 3 – 10
Vent. tone Off; 3 – 10
Table
7-9 Values for CPR feedback
The unit for the compression depth can be switched from centimetres to inches.
In AED-, manual defibrillation- and monitoring mode the acoustic messages of
the CPR feedback system (AAM – Acoustic Advisory Mode) can be enabled or
disabled and the volume of the messages can be configured.
The volume of the compression tone can be adjusted individually.
Setting
Audio
metronome
Unit
Audio AAM