GS corpuls3 - Data Transmission Via Bluetooth

Data Management User Manual corpuls
3
204 ENG - Version 2.1 – P/N 04130.2
8.10.1 Data Transmission via Bluetooth
®
The corpuls
3
can import and export data by radio via the optionally available
bluetooth data interface (P/N. 04211) With the radio module in the patient box
the user can transfer for example the process data of the corpuls
3
to external
documentation systems (as e.g. a tablet PC).
To establish a wireless connection to external devices, the PIN number has to
be configured and the Bluetooth
®
data interface has to be activated. This
configuration can only be changed by the person responsible for the device
who can activate this option permanently (see chapter 7.4.8 Configuration of
Telemetry (Persons Responsible for the Device), p. 170)
If the data interface is activated, the corpuls
3
can receive automatically an
connection authorisation for a connection with an external documentation
system, if this system has the same PIN. This procedure is also called „Pairing“.
If a connection to an external documentation system has been established via
the Bluetooth
®
data interface, the symbol for „Bluetooth
®
connection“ is
displayed in the status line.
Depending on the status there are additional markings of the above described
symbols for telemetry connections. A detailed description can be found in
Appendix A Symbols, page 272.
8.11 Insurance card reader (Option)
The insurance card reader allows to read out the patient data stored on the
insurance card of the patient so that they are available to the data management
in the corpuls
3
.
The patient data can be completed or changed during the mission by manually
entering information.
Persons responsible for the device can configure and save permanently which
data sets from the insurance card should be available in the corpuls
3
(see
chapter 7.4.12 Data Protection Settings (Persons responsible for the device),
page 182).
1. Insert the insurance card (with the chip oriented towards the user) into the
insurance card reader on the right-hand side of the monitoring unit.
Activation of the
data interface
Bluetooth
®
data
interface (option)
Symbol
Bluetooth
®
data interface
Connection
a
uthorisation
(Pairing)