User Manual corpuls
3
Configuration
ENG - Version 2.1 – P/N 04130.2 137
7 Configuration
Various different settings of the corpuls
3
can be configured:
• System settings
• Monitoring functions (ECG, Oximetry, CO
2
, NIBP, IBP)
• Alarms
• Advanced settings (for persons responsible for the device)
The corpuls
3
has user administration. Certain settings are therefore only
acessible for users with a higher authorisation level (such as persons
responsible for the device or service technicians). For default users, certain
configuration fields are greyed out and cannot be selected.
Permanent saving of changes in the configuration can only be performed with
the corresponding authorisation. If modifications made are not saved in the
system settings (see chapter 7.4.2 General System Settings (Person
responsible for the device), p. 160), all the adjustments will be lost when the
corpuls
3
is switched off.
The corpuls
3
always starts in the default user mode.
The configuration dialogues are opened with the jog dial by navigating in the
main menu (see chapter 4.3.3 Main Menu, p. 49).
The settings are selected and confirmed with the jog dial (see chapter 4.1.1
Operating Elements and LEDs on the Monitoring Unit, p. 31).
7.1 Configuring the System
7.1.1 General System Settings
The following general system settings can be configured:
• Time/Date
• Screen settings/Display
• Manual event
• Master data
To Next Page
Loading...
