GS corpuls3 - Configuration of Master Data (Persons Responsible for the Device)

User Manual corpuls
3
Configuration
ENG - Version 2.1 – P/N 04130.2 169
1. Select the required view with the jog dial and press the Back button to save
the currently configured view (only select the required field with the jog dial,
but do not press the jog dial to confirm).
2. A tick is entered in the check box in the top right corner of the selected view.
3. To confirm the new settings and close the configuration dialogue, press the
softkey [OK].
To retain the previous settings and close the configuration dialogue, press
the soft key [Cancel].
4. The setting is only permanently available if the configuration is saved in the
system settings (see chapter 7.4.2 General System Settings (Person
responsible for the device), p. 160).
The views for the defibrillator- and pacer mode can only be adjusted if the user
switches first to defibrillator- or pacer mode.
7.4.7 Configuration of Master Data (Persons
Responsible for the Device)
Persons responsible for the device may configure and permanently save master
data in the corpuls
3
(see chapter 8.4 Master Data, p. 188):
Information Description
Transport type Type of transport, e.g. “emergency vehicle”
Radio ID Identification of a radio subscriber in a
radiocommunication area, e.g. “FD x-city 1-83-2“
EMS location
Location of corpuls
3
Callback phone Mobile phone number, e.g. for enquiries to the team
Medical team Names of the medical team
Name organisation
Operator of corpuls
3
, e.g. “x-city fire brigade”
Phone organisation Telephone number of the operator
Device ID Operator’s internal device name, e.g. “Defi no. 7“
Table
7-16 Master data (persons responsible for the device)
The following steps are required to enter the master data:
1. Select in the main menu "System" ► "Settings".
2. Press softkey [Master].
3. Select the required master data information with the jog dial.
4. Enter the required data and confirm by pressing the softkey [OK].
5. Save the configuration (see chapter 7.4.2 General System Settings
(Person responsible for the device), p. 160).
Master data
Configuration of
master data
Note