GS corpuls3 - Page 226

Maintenance and tests User Manual corpuls
3
214 ENG - Version 2.1 – P/N 04130.2
Check Description Measures by the user Correct result
corPatch
intermediate
cable (if
available)
Check of the
corPatch
intermediate cable
 Check if the corPatch
intermediate cable is
present
 Check if the corPatch
intermediate cable is
undamaged
The corPatch
intermediate cable is
present and undamaged
Shock paddles Check for presence
and serviceability of
the shock paddles
Check if the shock paddles
and their connecting cable
are clean and undamaged.
The shock paddles are
present, clean and
undamaged.
Baby shock
electrodes
Check for presence
and serviceability
Check if the baby shock
electrodes are present,
clean and undamaged.
Baby shock electrodes are
present, clean and
undamaged.
Electrode gel
for defibrillation
Check for presence
of a sufficient
quantity of
electrode gel for
defibrillation
Estimate if the quantity of
electrode gel is sufficient for
the next mission.
Sufficient electrode gel incl.
replacement tube is present.
ECG and
sensor cables
Check all ECG and
sensor cables
Perform a visual check. Pay
attention to damage to the
cable.
 All ECG and sensor
cables present.
 No damage detectable.
ECG adhesive
electrodes
Check presence
and serviceability
 Check if sufficient ECG
adhesive electrodes for
recording the monitoring
and diagnostic ECG are
present.
 Check if the ECG
adhesive electrodes are
dried out or the expiry
date has passed.
 Store the ECG adhesive
electrodes protected from
air.
 Sufficient ECG adhesive
electrodes are present for
the next mission.
 The ECG adhesive
electrodes are not dried
out.
 The expiry date of the
ECG adhesive electrodes
has not passed.
Disposable
CO
2
adapter
Check the
disposable CO
2
adapters
Check if two of every kind of
disposable CO
2
adapters
are present and
undamaged.
Two of every kind of
disposable CO
2
adapters
are present and
undamaged.
Printer paper Check for the
presence of a
sufficient quantity of
printer paper
 Open the printer flap and
assess the amount of
printer paper present.
 Assess whether the
quantity is sufficient for
the next mission and
subsequent log printout.
 Check if a replacement
roll of paper is present.
 A replacement roll of
paper is present.
 The marking indicating the
end of the paper roll (red
stripe) (< 1.5 m) is not yet
visible.