1-4
<Sysname> display interface brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
GE2/0/10 DOWN DOWN --
NULL0 UP UP(s) --
Vlan1 UP UP 192.168.0.102
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface Link Speed Duplex Type PVID Description
GE2/0/1 DOWN 1G F A 1
GE2/0/2 DOWN 1G F A 1
GE2/0/3 DOWN 1G F A 1
GE2/0/4 DOWN 1G F A 1
GE2/0/5 DOWN 1G F A 1
GE2/0/6 DOWN 1G F A 1
GE2/0/7 DOWN 1G F A 1
GE2/0/8 DOWN 1G F A 1
GE2/0/9 DOWN 1G F A 1
# Filter the brief interface information to display the line starting with the (s) string and all subsequent
lines.
<Sysname> display interface brief | begin (s)
The brief information of interface(s) under route mode:
Link: ADM - administratively down
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
Loop0 UP UP(s) 2.2.2.9
NULL0 UP UP(s) --
Vlan1 UP DOWN --
Vlan999 UP UP 192.168.1.42
When you use the begin keyword to filter the output, the system only searches the Layer 3 interface
list or the Layer 2 interface list. If regular-expression is on the Layer 3 interface list, the system only
displays the line that contains regular-expression, and all subsequent lines on the Layer 3 interface list.
# Display brief information about all UP interfaces.
<Sysname> display interface brief | include UP
The brief information of interface(s) under route mode:
Link: ADM - administratively down
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
NULL0 UP UP(s) --
Vlan1 UP DOWN --
Vlan999 UP UP 192.168.1.42
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface Link Speed Duplex Type PVID Description
To Next Page
Loading...
Need help?
General
