H3C S7500E Series Command Reference

20-9
Field Description
System capabilities supported
Capabilities supported on the neighboring device, which can be:
 Repeater, indicating the signal repeating function
 Bridge, indicating switching
 Router, indicating routing
System capabilities enabled
Capabilities currently enabled on the neighboring device, which can
be:
 Repeater, indicating the signal repeating function is enabled.
 Bridge, indicating switching is enabled.
 Router, indicating routing is enabled.
Management address OID Management address object ID
Port VLAN ID Port VLAN ID
Port and protocol VLAN ID(PPVID) Port protocol VLAN ID
Port and protocol VLAN supported Indicates whether protocol VLAN is supported.
Port and protocol VLAN enabled Indicates whether protocol VLAN is enabled.
VLAN name of VLAN 1 Name of VLAN 1
Auto-negotiation supported Indicates whether auto-negotiation is supported.
Auto-negotiation enabled State of auto-negotiation
OperMau Current speed and duplex state
Power port class
PoE device type, which can be:
 PSE: power sourcing equipment
 PD: powered device
PSE power supported Indicates whether the device can operate as a PSE.
PSE power enabled Indicates whether the device is operating as a PSE.
PSE pairs control ability Indicates whether the PSE-PD pair control is available.
Power pairs
PoE mode, which can be
Signal
(PoE via signal lines) or
Spare
(PoE
via spare lines).
Port power classification
Port power classification of the PD, which can be:
 Class 0
 Class 1
 Class 2
 Class 3
 Class 4

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English