20-8
Aggregation port ID : 0
Maximum frame Size: 1536
# Display the LLDP information sent from all the neighboring devices in the form of a list.
<Sysname> display lldp neighbor-information list
System Name Local Interface Chassis ID Port ID
System1 GE2/0/1 000f-e25d-ee91 GigabitEthernet2/0/5
System2 GE2/0/2 000f-e25d-ee92 GigabitEthernet2/0/6
System3 GE2/0/3 000f-e25d-ee93 GigabitEthernet2/0/7
Table 20-2 display lldp neighbor-information command output description
Field Description
LLDP neighbor-information of port 1 LLDP information received through port 1
Update time
Time when LLDP information about a neighboring device was last
updated.
Chassis type
Chassis information, which can be:
Chassis component
Interface alias
Port component
MAC address
Network address (the IP address type, such as ipv4)
Interface name
Locally assigned (indicating the local configuration)
Chassis ID
ID that identifies the LLDP sending device, which can be a MAC
address, a network address, an interface or some other value
depending on the chassis type.
Port ID type
Port information, which can be:
Interface alias
Port component
MAC address
Network address (the IP address type, such as ipv4)
Interface name
Agent circuit ID
Locally assigned (indicating the local configuration)
Port ID Port ID, the value of which depends on the port ID type
System name System name of the neighboring device
System description System description of the neighboring device
To Next Page
Loading...
Need help?
General
