Harris IconMaster - Page 31

IconMaster Installation and Configuration Manual 15
Chapter 2: Installation
Scenario 7: Audio Control Panel Ordered Separately, Optional Modules
Ordered Separately; Internal (NSM) Routers Ordered Separately
Step Explained
1. Connect main control panel to audio control panel
page 21
2. Mount the control panel(s) into a desktop or a rack
page 23
3. Connect the control panel to another device
page 28
4. Install NEO options into NEO frame
page 35
5. Install NSM modules into NEO frame
page 31
6. Install NEO frame into a rack
page 37
7. Configure NSM modules
page 77
8. Attach breakout modules
page 43
9. Connect the NEO modules to another device
page 38
10. Check card-edge parameters are set to your preferences
page 69
11. Initialize IconMaster
page 126
12. Configure IconMaster control panel
page 147
13. Customize push buttons on control panel
page 63
Scenario 8: Audio Control Panel Ordered Separately, Optional Modules
Ordered Separately; Internal (NSM) Routers Preinstalled
Step Explained
1. Connect main control panel to audio control panel
page 21
2. Mount the control panel(s) into a desktop or a rack
page 23
3. Connect the control panel to another device
page 28
4. Install NEO options into NEO frame
page 35
5. Install NEO frame into a rack
page 37
6. Configure NSM modules
page 77
7. Attach breakout modules
page 43
8. Connect the NEO modules to another device
page 38
9. Check card-edge parameters are set to your preferences
page 69
10. Configure IconMaster control panel
page 147
11. Initialize IconMaster
page 126
12. Customize push buttons on control panel
page 63