Hioki PQ3100 User Manual

4
Safety Information
Safety Information
This instrument is designed to conform to IEC 61010 Safety Standards, and has been thoroughly
tested for safety prior to shipment. However, using the instrument in a way not described in this
manual may negate the provided safety features.
Before using the instrument, be certain to carefully read the following safety notes.
DANGER
Mishandling during use could result in injury or death, as well as damage to the
instrument. Be certain that you understand the instructions and precautions in the
manual before use.
WARNING
With regard to the electricity supply, there are risks of electric shock, heat
generation, re, and arc discharge due to short circuits. Individuals using an
electrical measuring instrument for the rst time should be supervised by a
technician who has experience in electrical measurement.
Notation
In this document, the risk seriousness and the hazard levels are classied as follows.
DANGER
Indicates an imminently hazardous situation that will result in death or serious injury
to the operator.
WARNING
Indicates a potentially hazardous situation that may result in death or serious injury to
the operator.
CAUTION
Indicates a potentially hazardous situation that may result in minor or moderate injury
to the operator or damage to the instrument or malfunction.
IMPORTANT
Indicates information related to the operation of the instrument or maintenance tasks
with which the operators must be fully familiar.
Indicates a high voltage hazard.
If a particular safety check is not performed or the instrument is mishandled, this may
give rise to a hazardous situation; the operator may receive an electric shock, may
get burnt or may even be fatally injured.
Indicates a strong magnetic-eld hazard.
The effects of the magnetic force can cause abnormal operation of heart pacemakers
and/or medical electronics.
Indicates a prohibited action.
Indicates the action which must be performed.
MONITOR
(Bold character)
Names on the screen are displayed in bold characters.
[ ] Operation keys are displayed in brackets ([ ]).
*
Additional information is presented below.
(Available after the
rmware update)
This function is not available with the present rmware. This function will be available
after the rmware version update scheduled in May, 2017.

Hioki PQ3100 Specifications

General

Brand	Hioki
Model	PQ3100
Category	Measuring Instruments
Language	English