142
Remote Control of the Instrument through the Internet Browser (LAN Communications Only)
12.2 Remote Control of the Instrument through the
Internet Browser (LAN Communications Only)
This instrument includes a standard HTTP server function that supports the remote control
through the Internet browser on a computer. The instrument’s display screen and control panel are
emulated in the browser. Operating procedures are the same as on the instrument.
The preparations for LAN communication are necessary. (p. 138).
Preparations
1
Launch the Internet browser.
2
In the address bar, enter “http://”
followed by the IP address congured in
the instrument.
For example, if the instrument’s IP address is
192.168.1.31, enter as follows.
When the browser has successfully
connected to the instrument, a main page
such as the following will be displayed.
• It is recommended to use Microsoft Internet Explorer version 9 or later.
• Unintended operations may occur if remote control is attempted from multiple computers simultaneously. Use
one computer at a time for remote control.
• Set the browser security level to “Medium” or “Medium-high.” Or enable the active scripting settings.
• Remote control can be performed even if the instrument’s key lock is active.
To Next Page
Loading...
Need help?
General
