127
Removing SD Memory Card during Recording
10.10 Removing SD Memory Card during Recording
Removing an SD memory card while recording data to the card may damage the data. To remove
the SD memory card safely during recording, saving data to the SD memory card can be stopped.
Only when the recording interval is set to 2 s or more, the SD memory card can be removed.
1
Press the [FILE] key to display the FILE,
SD card screen.
2
Execute card removal.
Remove SD
The SD memory card can be removed.
Procedure after removal
1. After all data in the SD memory card is copied to a computer or a similar device, insert the SD memory
card into the instrument.
If the SD memory card is returned to its original state by deleting the stored data or another SD
memory card is inserted, a measurement data folder is newly created. A measurement data folder that
differs from the previously created folder will cause the application software PQ One, which is supplied
with the instrument, not to recognize both of the measurement data to be the same.
To analyze the data stored in the SD memory card that was previously ejected and the one stored in
the card that is subsequently inserted, considering both of the data as equal, insert the SD memory
card with the original data left in it.
2. Check that the SD memory card is recognized.
(The icon
appears on the screen)
Trend record data will be divided and a new le will be created.
Saving operation when an SD memory card is removed during a recording
Only trend record data (p. 115) will be backed up in the internal memory with the recording interval time that
has been set. When an SD memory card is inserted into the instrument while recording is stopped, backup
data will be automatically moved to the SD memory card (the data will be divided and saved as a new le).
10
File Saving and Operations (FILE Screen)
To Next Page
Loading...
Need help?
General
