199
Disposing the Instrument
15.4 Disposing the Instrument
When disposing of this instrument, remove the lithium battery and dispose of battery and instrument
in accordance with local regulations.
WARNING
To avoid electric shock, turn off the power switch, disconnect all the cords and
cables from the device to be measured, and remove the lithium battery.
CALIFORNIA, USA ONLY
Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Required items
Phillips screwdriver (No. 2)
1
Turn off the instrument. (p. 44)
2
Remove all the cords connected to the
instrument.
3
Remove the 10 screws shown in the
following diagram with the Phillips head
screwdriver and remove the battery
pack cover and side covers.
4
If the Z1003 Battery Pack has been
installed, remove the battery and the
screw at the battery pack holder.
4
15
Maintenance and Service
To Next Page
Loading...
