Hioki PQ3100 - 3 Quick Set Functionality; 3.1 Configurable Items List

45
3
Quick Set
The Quick Set function allows easy settings for minimum recording/measurement requirements by
following the guidance.
The setting proceeds in the following order: “1. Basic Settings,” “2. Device Connections,” “3. Voltage
Wiring,” “4. Current Wiring,” “5. Wiring Check,” “6. Event Settings,” “7. Recording Settings,” and “8.
Recording Start.”
See the supplied Measurement Guide for details.
3.1 Congurable Items
The items listed below can be congured with the Quick Set.
To congure other items not listed here*, see “3.2 Adding Settings” (p. 46).
*Example:
• Set the VT and CT ratios.
• Change the event settings.
Setting Details
Wiring Congure the wiring.
Current sensor Congure the current sensor.
Declared input voltage Congure the declared input voltage.
Current range Congure the current range.
Easy settings course After this course is selected, event settings and recording interval will be
automatically congured.
Recording interval Congure the recording interval.
Recording start method Congure the recording start method.
Recording stop method Congure the recording stop method.
Folder/File name Congure the folder/ le name.
Clock Congure the clock.
3 Quick Set
3
Quick Set