35
2
Preparing for Measurement
Before starting measurement, connect accessories and options to this instrument. Before
performing measurement, be sure to read “Operating Precautions” (p. 7) and to inspect the
instrument, accessories, and options to ensure that there is no damage.
2.1 Preparation Flowchart
Follow the procedure for preparation described below. (The items preceded by
†
need to be
performed only during the rst use.)
†
Initial Measurement Preparations
• Color coding of current sensor (for channel identication) (p. 36)
• Bundling the voltage cords and current sensors (If required) (p. 37)
• Installing the battery pack. (p. 38)
• Attaching the strap (if required) (p. 39)
• Setting the language, clock, and measurement frequency (p. 40)
Pre-Measurement Inspection (p. 41)
Inserting the SD Memory Card (p. 42)
Power Supply (p. 43)
Turning On the Instrument (p. 44)
Warm-up (p. 44)
• At least 30 min
2 Preparing for Measurement
2
Preparing for Measurement
To Next Page
Loading...
Need help?
General
